What size is a 32mm wrench?
What size is a 32mm wrench?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 32mm | 1-1/4″ | |
| 7/8″ | 34mm | 1-5/16″ |
| 35mm | 1-3/8″ | |
| 1″ | 38 mm | 1-1/2″ |
What sizes are in a metric wrench set?
Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
What size is a 36 mm wrench?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.417 | 36mm | 36mm |
| 1.418 | 1 7/16 AF | |
| 1.480 | 7/8 Wworth; 1in BSF | |
| 1.500 | 1 1/2 AF |
What is the smallest metric wrench?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
|---|---|---|
| 11mm | 8mm | 14mm |
| 12mm | 9mm | 15mm |
| 13mm | 10mm | 16mm |
| 14mm | 11mm | 17mm |
What metric wrenches are the same as SAE?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
What is the SAE equivalent of 33mm?
SAE to metric wrench or spanner converting chart.
| Standard SAE US Wrench/Spanner Size (inches) | Metric Wrench/Spanner Size (mm) |
|---|---|
| 1 1/4 | 31.75 |
| 32 | |
| 33 | |
| 1 5/16 | 33.34 |