Will a 400EX rear shock fit on a 300ex?
Will a 400EX rear shock fit on a 300ex?
What about YFZ450R or Raptor 700 shocks; will they fit my 300EX? By the way, 450R shocks will fit on a 400EX, and 400EX A-arms will fit a 300EX.
Will a 400EX motor fit a 300ex frame?
the 300ex fits in the 400ex frame so I would say no, the 300ex frame cannot hold a 400ex motor.
How long are 300ex front shocks?
Stock 300ex front shocks are 13″ from center of bolt hole to center of bolt hole. The 300ex rear shock is 14.38″ from center of bolt hole to center of bolt hole. And the 250ex front shocks are 12.5″ from center of bolt hole to center of bolt hole.
How long is a 400EX shock?
Stock length of a 400ex shock is 15.5 inches, the 450r (least the 04 I grabbed) is 14.75. Might not seem like much, but just by looking at it I can tell its lower.
Will 450r A arms fit 400ex?
Will 450ra arms fit on a 400ex? No, they are too wide at the mounts.
How long are 400ex front shocks?
actually the shocks 16.25 in.
Will trx450r shocks fit 400ex?
any year 450r shock will work on the 400. they are a huge improvement over stock. yes they are a bit stiff, but if your on a budget, they’re great… plus you can have them revalved to make basicly aftermarket. the rear 450r shock is really no better than the 400ex rear shock.
Will 250r A arms fit 400ex?
Nothing has to be done to the 400ex a-arms. basically the 400ex are are narrower at the pivot bolt. So when you put them on the 250r, you have to use some washer ‘s or some other spacer on either side of the arm to make up the extra space.
Where are Elka shocks made?
Montreal, Quebec, Canada
Elka shocks are made in Montreal, Quebec, Canada pretty much every day of the year. The company’s first business is to supply the aftermarket with fitments for hundreds of ATVs, motorcycles, snowmobiles and SxSs through an expansive dealer network across North America.
Will 450r A arms fit on a 400ex?
Are Elka shocks any good?
The Elka Stage 4 shocks allow many more adjustments, such as preload, rebound, and compression at high and low speed, a true luxury! They are a bit heavier than the stock shocks, but the difference isn’t enough to be of any significance. Installation. This subject will not require many explanations.
How do you identify Elka shocks?
Make sure to take note of the shocks’s serial number that is engraved on the shock head, on the opposite side of the reservoir / hose / valve and is usually composed of 2 letters followed by 4 digits (AA####).