What was the main problem with fiber cement board siding?

Cutting fiber cement siding generates respirable crystalline silica, a known human carcinogen. Inhaling too much silica can lead to silicosis, lung cancer, and COPD.

Can you install fiber cement siding yourself?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

Do you need OSB behind fiber cement siding?

Fiber cement siding should be installed over plywood, OSB, or sheathing. Be sure that the siding installed is dry.

How much does cement fiber board cost?

In general, fiber cement siding costs anywhere from $5.00- $13.50 per square foot installed.

How often should fiber cement siding be painted?

every 10 to 15 years
If you purchase prefinished fiber cement siding, you don’t need to worry about painting it when it’s time to install. Unfinished styles on the other hand should be painted shortly after installation. For both types, a new paint job can be done every 10 to 15 years.

How do you replace one piece of fiber cement siding?

To remove and replace damaged siding: Cut the fiber cement siding to length (wear approved dust protection). Blind-nail the fiber cement siding in place, starting with the bottom piece. Face-nail the top piece of fiber cement siding through the old siding. Prime and paint new siding to match the old.

What do you put behind fiber cement siding?

Fiber cement siding can be nailed by hand or with a pneumatic nailer. It can also be attached using corrosion resistant screws. Use hot-dipped galvanized or stainless steel nails. Nails should penetrate through the sheathing and at least 1” into studs.

Can fiber cement siding touch the ground?

Ground Contact: While fiber cement siding is made to shed water, it’s not designed to be buried in wet soil. Most manufacturers of fiber cement siding, and many building codes, recommend keeping the siding at least 6” off the ground.

How much does it cost to put fiber cement siding on a 1500 sq ft house?

For an average 1,500-square-foot home, installing fiber cement siding will cost an average of $13,000, including materials and labor.

What is the difference between vinyl siding and fiber cement siding?

Fiber cement and vinyl siding both make fine siding options for home exteriors—and they don’t chip like brick and stucco. Vinyl costs less to install but isn’t permitted on historic homes. Fiber cement looks more natural but tends to fade and requires more maintenance.